$450.00
Tackle intense regional glare and outback heat behind the wheel with a dedicated LandCruiser 70 Series sun visor. Precision-formed to replace brittle, drooping factory equipment across all 70 Series cabins from 1984 to present—including single cab, dual cab, wagon, and Troop Carrier models—this direct-fit interior panel secures straight into original roof mounting holes with no drilling required. Fabricated from high-impact, UV-rated acrylic, the panel filters out 99% of damaging UV rays, covers annoying perimeter light gaps, and significantly lowers in-cab thermal load. Built with heavy-duty hinges to resist corrugation sag, this LandCruiser 70 Series sun visor keeps your eyesight protected and relaxed on long touring expeditions and remote work shifts alike.
Traversing remote cattle stations, touring the red dirt tracks of Western Australia, or running long highway hauls across regional Queensland exposes the limits of original factory cab equipment. Decades of blistering summer heat cause standard interior visors to sag, warp, or snap at the hinge, creating annoying blind spots while failing to shade low-angle morning and late-afternoon sun. Fitting an upgraded LandCruiser 70 Series sun visor provides a dependable solution, giving four-wheel drivers an effective overhead barrier against blinding glare and punishing solar heat.
Engineered around the classic cab contours of the 70 Series platform, this LandCruiser 70 Series sun visor delivers extended glass coverage to eliminate wide light gaps around the rear-view mirror and A-pillars. Unlike generic universal shades that rattle or fit poorly, every unit mounts directly to factory anchor positions, delivering a secure, rattle-free installation designed to handle corrugated roads, station duties, and demanding overland travel.
Extended Forward Shading: Formed with extra surface area to cover the peripheral edges of the windscreen, deflecting low-angle sun that standard shades miss.
99% Harmful UV Absorption: Built from UV-rated acrylic that filters out 99% of UVA and UVB radiation, keeping the interior cabin cooler and reducing thermal load on your air conditioning.
Sag-Free Reinforced Hinge: The LandCruiser 70 Series sun visor utilizes a heavy-duty, tensioned hinge assembly designed to stay in place across corrugated tracks without dropping down unexpectedly.
Direct-Fit Factory Mounting: Bolts directly into original roof threaded points using factory-spaced hardware, requiring no drilling or cab modifications.
Rear-Vision Clearance: Thoughtfully shaped to clear the rear-view mirror completely, allowing full mirror adjustment and compliance with driver visibility requirements.
Anti-Glare Surface Finish: Specially treated to eliminate distracting reflective bounce from instrument binnacles, flat bonnets, and metallic bull bars.
Upgrading to a purpose-built cab visor delivers practical, everyday driving advantages:
Reduced Driver Fatigue: Staring directly into harsh outback sun accelerates eye strain. Installing a LandCruiser 70 Series sun visor creates a comfortable forward shadow, making 12-hour touring days safer and less exhausting.
Dashboard & Cab Preservation: Excessive heat cooks interior trim, dries out dash vinyl, and damages aftermarket stereos. This overhead shield limits direct radiant exposure to protect cabin components and preserve long-term vehicle resale value.
Corrugation Stability: Washboard tracks like the Tanami or Gibb River Road quickly shake loose inferior interior parts. This rigid assembly holds firm tension through sustained vibration.
ADR Compliance: Conforms to Australian Design Rules standards for forward line of sight, ensuring your vehicle remains fully compliant for roadworthy inspections.
This interior replacement sun visor suits the full Toyota LandCruiser 70 Series lineage built from 1984 to present:
79 Series Single Cab & Dual Cab Utes
78 Series Troop Carriers (Troopy)
76 Series 4-Door Wagons
Classic 70 & 75 Series LandCruiser cabs
Right-Hand Drive (RHD) Australian specification cabins
Pre-2007 variants supported via optional screw-spacing adaptors where required
Note: Please verify your model year and cab configuration prior to purchasing your LandCruiser 70 Series sun visor.
Harsh regional conditions demand automotive components that will not crack or curl when parked under 45°C summer sun. Every LandCruiser 70 Series sun visor is manufactured from high-impact, UV-stabilised automotive acrylic engineered to withstand extreme thermal expansion. Paired with corrosion-resistant mounting brackets and heavy-duty internal tension springs, this hardware remains rigid, quiet, and reliable through years of punishing regional use.
Fitting your new interior visor is an easy job requiring only a standard Phillips-head screwdriver:
Unscrew the original retaining screws from your aged or broken factory visor bracket.
Carefully detach the old assembly from the interior roof mounting point.
Position your new LandCruiser 70 Series sun visor against the factory threaded holes.
Tighten the mounting screws securely, ensuring firm tension and smooth pivot action without overtightening.
Care Advice: Clean the acrylic surface using a clean microfibre cloth dampened with warm water and mild car wash shampoo. Avoid industrial degreasers, ammonia-based glass cleaners, or abrasive scouring pads to keep the anti-glare finish clean and clear.
1 x Direct-Fit LandCruiser 70 Series sun visor (Driver or passenger side as selected)
1 x Heavy-Duty Hinge Bracket & Factory-Spaced Hardware Pack
1 x DIY Installation Guide with QR Code Access to Fitting Video
All Model 4×4 Spares supplies rugged, vehicle-specific 4WD hardware tailored to the real-world demands of Australian tourers, tradies, and off-road adventurers. When you order your LandCruiser 70 Series sun visor from us, you get components engineered to fit right the first time, backed by dependable Australian stock dispatch and responsive customer support from a dedicated 4×4 parts team.
FAQs
Will this LandCruiser 70 Series sun visor fit all model years from 1984 to present? Yes. The visor profile fits 70 Series cabins from 1984 to current models, including 76, 78, and 79 Series vehicles. For select pre-2007 cabs with different screw-hole spacing, dedicated adaptor brackets ensure a straightforward fit.
Does this visor interfere with the centre rear-view mirror? No. The inner edge is contoured to finish just short of the rear-view mirror mount, allowing unrestricted mirror adjustment, tilting, and day/night flicking.
Can I install this LandCruiser 70 Series sun visor myself? Yes. Installation takes less than 10 minutes per side using a standard Phillips-head screwdriver, bolting directly into the existing factory threaded holes in the roof frame.
Is this visor suitable for left-hand drive vehicles? No. This panel is specifically formed and trimmed for Right-Hand Drive (RHD) Australian-delivered LandCruiser cabins.
