$450.00
Stop dangerous bonnet glare and intense low-angle sunlight from compromising your vision with this heavy-duty Toyota LandCruiser ute sun visor. Fabricated from solid steel for enduring strength across corrugated outback tracks, this external windscreen visor suits the complete 70 Series range from 1985 onwards—including 2-door single cab utes, 4-door dual cabs, 4-door wagons, and Troop Carriers. Supplied pre-primed in grey on top and coated in non-reflective green on the underside to minimise eye strain, it is designed for a straightforward fit around standard snorkel mounts and gutters using the included stainless steel hardware.
Driving a 70 Series LandCruiser across outback highways, open agricultural paddocks, or remote mine sites means dealing with relentless sun and blinding bonnet reflections. A solid exterior Toyota LandCruiser ute sun visor provides an indispensable forward shield, cutting harsh sun before it ever hits your windscreen glass. Engineered specifically to handle severe regional conditions, this external visor gives tourers, tradies, and fleet operators dependable forward visibility and a tough, classic look.
Crafted from solid steel rather than thin plastic mouldings, this visor provides rigidity on high-speed corrugated roads. It comes prepared in a workshop-ready grey primer so you can easily colour-match it to your LandCruiser’s bodywork, while the underside features a dedicated green finish to absorb reflection and keep driver eye strain to an absolute minimum.
Solid Steel Construction: Heavy-gauge fabricated steel body engineered to resist vibration, high wind buffeting, and corrugated track fatigue.
Dual-Tone Finish: Delivered in a sandable grey primer ready for your custom vehicle topcoat, paired with a glare-absorbing green underside.
Broad Model Compatibility: Tailored to fit 70 Series platforms from 1985 onwards, supporting both standard gutters and models fitted with factory chrome trims.
Snorkel-Compatible Fitment: Designed to anchor cleanly on the driver’s side A-pillar between the body and factory snorkel bracket.
Corrosion-Resistant Hardware: Ships complete with a durable stainless steel passenger-side gutter clamp for dependable cab anchoring.
Full-Width Windscreen Shading: Blocks overhead glare and reduces direct cabin heat transfer through large vertical LandCruiser glass.
Outback tracks like the Tanami, Oodnadatta, or remote mine access roads present constant sun exposure. When sun reflects off a wide bonnet, polished bull bar, or flat red earth, factory interior visors only provide partial coverage.
Mounting an external steel visor over your windscreen creates an active physical barrier that cuts midday heat soak through the glass and eliminates low-angle morning squinting. Because it is fabricated from pressed solid steel, it will not warp, flutter, or rattle over thousands of kilometres of washboard corrugations.
This solid windscreen sun visor suits the full line-up of Toyota LandCruiser 70 Series models manufactured from 1985 onwards, including all GXL, Workmate, and standard spec trims:
2-Door Single Cab Utes (1985–Onwards)
4-Door Dual Cab Utes (79 Series)
4-Door Wagons (76 Series and equivalent variants)
2-Door Troop Carriers / Troopy (75 / 78 Series)
Compatible with both standard painted gutters and models featuring chrome gutter dressing moulds.
Body Material: Pressed, heavy-duty solid steel.
Topside Prep: Coated in a protective grey primer, ready for automotive basecoat and clearcoat application.
Underside Finish: Finished in traditional anti-glare green to prevent reflected light bounce from the vehicle bonnet into the driver’s eyes.
Mounting Brackets: Driver’s side pillar mounting profile matched with a stainless steel passenger-side gutter clamp assembly.
Fitment is designed for practical installation using standard workshop hand tools:
Driver’s Side: Positions directly to the driver’s side A-pillar, mounting between the snorkel bracket and the cab body.
Passenger’s Side: Clamps securely onto the passenger roof gutter using the provided stainless steel clip.
Securing: Fastened into place on the passenger side using two supplied self-tapping screws.
Note: Before final painting, dry-fit the visor to verify alignment with your vehicle’s windscreen, gutter profile, and snorkel bracket spacing.
1 x Solid Steel Windscreen Sun Visor (Grey primer exterior / green anti-glare underside)
1 x Stainless Steel Passenger-Side Gutter Clamp Clip
2 x Fastening Self-Tapping Screws (Passenger side fitment)
All Model 4×4 Spares supplies rugged, vehicle-specific 4WD components built for the realities of Australian touring, farming, and trade duties. We focus on durable, practical hardware that withstands the Australian climate, delivers dependable fitment, and eliminates guesswork. With local dispatch and dedicated 4×4 parts support, we deliver the quality gear you need to get the job done right.
FAQs
Does this Toyota LandCruiser ute sun visor fit models with a factory snorkel? Yes. The driver’s side mounting bracket is explicitly engineered to fit onto the A-pillar between the cab body and the snorkel bracket, allowing normal snorkel positioning.
Can this visor be fitted to LandCruisers with chrome gutter moulds? Yes. The mounting hardware and visor profile accommodate both standard painted gutters and GXL models fitted with factory chrome gutter dressing.
What preparation is needed before painting the visor? The visor comes finished in grey primer on the top surface. We recommend light scuffing and cleaning with wax and grease remover prior to applying your preferred automotive topcoat or colour-coded spray paint. The underside is already painted green to minimise cabin reflection.
Will this visor fit a 78 Series Troop Carrier? Yes. The visor is fully compatible with 70 Series Troop Carriers (Troopy) from 1985 onwards, sharing identical gutter and cab mounting profiles with the ute and wagon platforms.
